The absorbent liquid is usually ammonia or lithium bromide, and the coolant is usually water. Inside the stationary housing it contains to mating helically grooved rotors. Direct volume reduction is achieved when the helical rotors rotate. The capacity of a rotary screw compressor varies between 20 and 450 tons and is controlled by a sliding inlet valve or variable speed drive. Water cooled chillers can handle larger loads, for their floor space, compared to air cooled. Absorption chillers should only be used where there is an abundance of high quality waste heat or cheap heat. They are often found in hospitals and buildings with heated swimming pools. Sometimes they are used during times of day when electricity prices peak. Nice late Model 2007 Trane larger Air Cooled Chiller, 250 ton size, 460 volt. Unit has been vacuum and leak tested, and new charge put back into unit.

S&A Teyu CW-3000 water chillers are able to cool CNC spindles and are energy saving with compact design,stable cooling performance, ease of use and provide good protection for the equipment. The higher efficiency of cooling towers makes them more suitable to large-scale applications where high amounts of cooling are required. Any industrial plant that requires continuous cool water flow will typically use a cooling tower. Chillers are used in smaller applications that aren’t directly affected by the discharge of extra heat. As for cooling towers, they consist mainly of pumps and a basin. When you use a cooling tower, the pumps send the water throughout the facility in order to cool the area. No matter which type of cooling tower you use for your industrial application, the cooling flow is created when the pumps allow the water to circulate in the tower. The distribution basin that’s used with the cooling tower will collect any of the discharged water. The air that enters the cooling tower from outside has a different density than the interior air.

check here

In some areas, doing so is against city and county regulations, while the cost of doing so in any area is often prohibitive as well. Choose the portable air-cooled chillers from Shini USA to receive a reliable, efficient system to incorporate into your operations. The careful organization and overseeing of the shipping process is essential to ensuring the equipment’s condition is maintained right up to your delivery. At our highly specialized Surplus Group facility in Dallas, we have the people, resources and processes in place to ensure all equipment meets our “Surplus at its best” Standard of condition and value. Get additional information on federal product purchasing requirements. Federal agencies must purchase products that meet or exceed FEMP-designated efficiency levels. Federal purchases must meet or exceed the minimum efficiency requirements in Table 1.

An efficient product is cost-effective when the lifetime energy savings exceed the additional up-front cost compared to a less efficient option. FEMP considers up-front costs and lifetime energy savings when setting required efficiency levels. Federal purchasers can assume products meeting FEMP-designated efficiency requirements are life cycle cost-effective. In high-use applications or when energy rates are above the federal average, purchasers may save more if they specify products that exceed FEMP’s efficiency requirements (e.g., the best available model). Both kinds of air-cooled chiller and water-cooled chillers are composed of a compressor, an evaporator, a condenser, and a thermal expansion valve. Please contact our refrigeration engineering to customize your air cooled chillers. All these scroll compressors featuring excellent cooling capacity with compressor inner protection and energy saving. Witness your used air cooled chiller being load and performance tested either in person or by video. We are the Big Box of lightly used air cooled chillers for sale in the USA.

The frame is capable of point loading, which lowers installed cost by eliminating expensive field-erected base rails. We guarantee that our unit performs to advertised specifications, but the end user must decide if the chiller meets their application requirements. For most applications that just need a basic general purpose chiller to cool down process water, our chillers generally work great. It’s able to cool CO2 laser tube, CNC spindle or welding equipment or solid-state laser. An air-cooled chiller has a condenser that is cooled by the environment air. Therefore, theses are perfect for smaller or medium installations.

Arrived to KIG in January 2020 is this pair of nice Thermal Care 20 ton Air Cooled Chillers. Units are 2012 and have dual compressors, hefty 5 hp process pump, insulated tank, and upgraded to the NQ series touch screen control. Water chillers remove heat by pumping water through a sealed condenser and dispersing it through the cooling tower. Water-cooled chillers are typically more efficient than air-cooled chillers. Using water evaporation to dissipate heat uses significantly less energy than blowing air across a hot surface. Additionally, water chillers tend to last longer than air-cooled chillers. Experience reliable and consistent temperature control as well as unmatched customer service when you choose Thermo Fisher Scientific. Our air-cooled chillers are durable, have user-friendly features, and are designed to remain quiet over its entire operating range.

These 5 ton Koolant Koolers chillers went through refurbishment here at KIG. They feature a robust tube type rectangular exchanger which is cleanable. Fabricated and installed a new stainless reservoir tank, and an appropriate centrifugal water pump .The units were piped in a “closed loop” configuration. We can provide the unit without a tank, for an open loop application for a reduced price . Arrived at KIG in December 2015 were three Zarsky / Cold Shot 5 ton Air Cooled Chillers. 460 Volt, 5 hp Copeland compressor, OUTDOOR rated, and LOW TEMP (28°F fluid temp) capable. Units were run and tested completely at 28°F at our 13,000 square foot facility prior to shipping, and offered with money back guarantee.

Your air cooled screw chiller should be maintained regularly to ensure the unit operating in a good state. Always switch off the air cooled screw chiller to cut off the power supply before any maintenance work, even if the only inspection is involved. Every air cooled screw chiller passed strict inspection and testing to ensure performance and quality. The use of ethylene glycol mixtures is intended to prevent freezing in air cooled screw chiller heat exchangers. 1)The air cooled screw chiller may install on the roof of the building, ground, or other location, where does not need the equipment room. High-quality process equipment and testing center to ensure the air cooled screw chiller has energy-saving and reliable features. Please note the air cooled screw chiller is suitable for outdoor installation in atrocious weather. Therefore this air cooled screw chiller runs in the best economical state. Pre-set operating mode and program realize the air cooled screw chiller to run in energy-saving all the time.

Air Cooled Chillers offered by General Air Products range from fractional (0.25) up to 60 tons in cooling capacity. Our industrial air chillers are available in a variety of configurations – packaged with a pump and tank, portable, stationary, without pumps or tanks and split units. air cooled chillers that are easy to install, easy to repair and will give you significant savings. The air cooled chiller is compact in size allowing for easy installation in places where space is severely limited. Along with cost efficiency in purchase and installation, Aqua Series chillers are also more affordable to operate. They are highly efficient, with full-load energy efficiency ratios up to 10.9 and integrated part-load value ratings as high as 17.9. The key to Aqua Series chillers’ great operating performance is the use of highly efficient rotary scroll and screw compressors. These compressors use patented sealing techniques, allowing for high volumetric efficiency and low frictional losses.